Your home’s climate control system is the unsung hero of your comfort all year round. It’s usually not until the weather hits extremes that we start to think about our forced air system… or until a problem makes it impossible to ignore. When there’s disruption to your comfort, your first instinct might be to call a heating contractor in Oregon City, OR for emergency services. But what if you could troubleshoot and potentially solve that problem yourself?
Furnace problems and their solutions occur on a scale. While you shouldn’t think twice about calling a heating contractor for something like blower motor repair, minor solutions like a filter change are well within your scope of abilities. Here’s how to troubleshoot a furnace problem to figure out if it’s something you can resolve on your own or if you need a hand from a professional.
Start with the basics
The easiest way to pinpoint furnace issues you can fix is to start by examining the scope of solutions you’re capable of providing. That means looking for basic problems with basic solutions. Some of the most common include:
- Is your furnace filter clogged and dirty? If so, replace it.
- Is your thermostat set appropriately? If not, take a minute to program it.
- Is the furnace breaker on? If not, flip it on and see if it stays on.
- Is the power switch for the furnace on? If not, flip it on.
You might laugh at how simple these problems and their solutions are, but you’d be amazed at how often minor issues cause real problems. Flipping a switch or changing a filter can save you the cost of a service call and offer insight into what might’ve caused the problem you’re experiencing.
Explore the symptoms
Furnace problems vary greatly and come with different sets of symptoms. The inability to produce heat signals a very different problem from a furnace that won’t turn on. No heat might be a problem with the pilot light or flame sensor, while not working at all might signal an electrical problem. Sometimes, symptoms can clue you into problems you can fix on your own.
Your furnace breaks down into different subsystems, which are powered in different ways. For example, the heating system that produces the flame that heats your air is gas-powered. The ignition system and blower controls are powered by electricity. The blower system itself is powered mechanically. Knowing the nature of the problem based on its symptoms can help you become more aware of a problem, even if you can’t fix it yourself.
Describe the issues to a professional
If you’ve explored as far as you can and fixed the minor issues you feel comfortable with and capable of fixing, leave the rest to a heating contractor in Oregon City, OR. The best thing you can do to facilitate a quick repair is to share what you know, in detail. Explain the symptoms, how the system is behaving, what you’ve done so far and how long the issue has persisted. A qualified expert will do what you can’t and take the problem the rest of the way toward a solution.
Categorised in: Furnace Maintenance
This post was written by Writer